Відео

Man I still own an RCA Voyager III, this was Walmart's to go Tablet brand before they decided to add tablets to their ONN brand, I got mine one Black Friday sale many moons ago and in my case it was running Android 7 Nougat and just like yours probably slow and just to run light tasks.

Unique design

What was the resistor value? I have the same one with a burned resistor. I put one in it but it doesn’t look like the right one. The fuse on mine is also burned but I want to make sure I have the correct resistor too.

2 reasons why it’s not turning on u had the charger on and ur supposed to hold the button not click it

My question is how did you get the insert off???😂

Use of the slide rule gives you a much better appreciation for the numbers and methods of mathematics than using a calculator. The calculator will give you answers, but to so many digits that it is not possible to know if the answer is reasonable or not. I love using a slide rule.

Ty so much it’s finally working

It spies on you and how you drive. Reports to Toyota for "diagnostic purposes" and they sell it to insurance companies and they raise your rates due to the driving habits the DCM module keeps track of and transmits.

May have accidentally dropped it going home or something..

I have had a PL-310Et for some time now. A great little radio, with huge performance which I use when on holiday away from home. The Tecsun wind-up antenna really makes it sing.

Parabens pelo seu video, assim poderá ajudar muita gente, o meu waterpik wp 900 deixou de regular a velocidade e a água perdeu pressão, pode informar como consertar o seletor do motor? muito agardecia.

How do I remove the plastic gray piece if it won't move?

Hi do you mind mentioning where you got thst first Skeleton watch

Omg, thanks for this

HEY MAN NICE VIDEO FOR 9$ YOU GOT A GOOD WATCH BUT YOU TRY HIGH QUALITY REPLICA WILL BE A BIT EXPENSIVE BUT IT WILL BE LIKE REAL DEAL , BEEN USING ORIGINAL AND HIGH QUALITY REPLICAS TOTALLY IMPRESSED

So would the way to fixing the scooter be replacing the battery?

Excellent sound!!!! (Model 1993)

I clipped my buzzer and now my microwave wont turn on. what the heck man.

I would be grateful if those who know about these things would tell me how they work. Specifically I am wondering why I have to pay monthly for the tracking service, and whether it's possible to somehow hack this to switch to a mobile phone I have. This question may seem odd because I'm not even sure how to formulate it, I don't have the necessary understanding of the technology. I am just looking at this and thinking that it communicates with local cell towers, in the same way a mobile phone does. If that is the case, and the company charges a subscription service, then it seems like it's using the same tech as a phone. As one can switch cell providers, I'm wondering if this could be messed with to accept a sim I purchase. Again I apologise for the absolute ignorance of this question. I am only trying to understand how the tech works.

I bought a new Kenwood microwave from Currys the first thing l did was remove the casing then cut the wire on the piezo buzzer.

And the battery pack does actually contain what's known as a management system, BMS which monitors the voltage of each cell within the battery pack and if any of the cells are out of spec the BMS will completely shut its charge input and main out put down.

The controller will not necessarily reset each time the battery is shut off, the controller contains a charged capacitor that needs to discharge, and I'm almost certain that the E5 error code has something to do with a connection with one of the hall sensors momentarily disconnecting.

Yeah, vehicle theft is the only reasonable explanation. Google says its an onstar unit from a cadillac

This happened because of them drilling at it. The dentist did it.

I’m glad someone did a video on this. Thank you. I took mine apart and was having a hard time getting it back together.

No ssd ? No slot either ?

🎉🎉🎉🎉🎉😅😅😮😮😮🎉

14:31 Max😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

You are a terrible demonstrator

if anybody reads this, do not bypass the fuse. If it wasn't needed, the manufacturer/engineers wouldn't have included it. if you're going to replace components, make sure you get the exact same rated parts to replace them with. these machines are designed to run at specific specs and you start going around changing capacitance or resistance ratings, you could further break the machine or hurt yourself

This guy has no clue about what he doing and yet buys a prograde grill ??????,

Great to see how it works! Mine is malfunctioning. I charge it and the lights come on but the motor starts and stops. I’ll try a different cable but maybe it needs a new battery. The shaver is over $100 here so maybe I can simply put in a new rechargeable battery. Now I know how. Thanks!

Could you possibly post instructions on how you removed the microwave from the cabinet and trim kit? We have a MS24 that failed with food in it, and simply want to buy a new one and reuse trim kit.

Gen11 is in GM car model

If it has a IEMI number, it is cellular capable. EDIT: I am looking up the FCC ID number, there is a lot of useful information on their site unbelievably.

And the plot thickens! I took it out for a test run after the fix, ran it around the neighbourhood for 5 minutes and then got up to 25 km/h just before an intersection at which I had to stop. So I slammed on the brakes! Scooter took a bit longer than usual to stop (which I figured was due to my speed and weight). After the stop I looked down at the display and it was off! Dead! Could not power it up again. I took off the display panel (since it is now looser than usual) and nothing I did there worked. So I don't think it had anything to do with that board. Walked home and opened up the bottom, ONLY disconnected the main battery (yellow plug) for a few seconds and connected it again, and the scooter turned on! So seems like a hard reset (complete power disconnect) resets the logic boards in the controller and allows power button to work again. I guessed that maybe it has to do with hard stops using the brake... because it has a brake light on the tail fender, maybe something faulty going on there? Or maybe if detects acceleration and braking at the same time it went into a safety shutdown? Or maybe when the scooter senses that the brake is applied but not slowing down quickly enough, it will also trigger some safety mode where it goes completely dead? Not sure if these scooters have regenerative braking, but if so them perhaps once polarity reverses to the motor to charge up the battery, it is overloading the charging circuit, detects a fault and shuts off? These are all hypotheticals. So in any case, I scootered back and forth along my street, going up to 25 km/h, slamming on the brakes, accelerating, slamming on the brakes, repeatedly for about 5 minutes and could not reproduce the problem! Now the scooter is not shutting off when I put it through these hard cycles. I'm still at a loss to understand what exactly is triggering the failure, but so far a hard reset seems to get it up and running. Therefore, if I cannot solve the problem I may have to put a switch on the side of the scooter that lets me hard-reset the battery (like just serial-connect the battery through the switch) or create an access panel so I can easily get to the battery yellow plug. If this happens while I'm on the road, I can quickly and easily reset the scooter. Otherwise I'm looking at removing and putting back 15 screws each time!

What is hilarious is to fake $150 watch. Not even, as you can get it for like $50-80 at zalando every few months xd

I picked up a Casio 96H at Walmart for Five Dollars! That makes it less expensive than the Skmei!

Where did you order these from?

hey I just treaded a chocolate bar for this walkman and I was wondering if you could give me any headphone recommendations

Same problem

Exactly what happened to my series 6 about a month ago. And I had it since October 2020. I called Apple support and they asked me for my serial number. But like what’s the point of giving it to them if my watch was bought like four years ago, so definitely warranty was expired. I was nearly going to glue it back on but thought that it was a bad idea in the end. Now I have the series 9 and it works perfectly great.

Their advertising specifically mentions the side burner is meant for cooking steaks. they said the heat given off the infrared burner incinerates the juices and therefore leads to little to no drippings.

How did you order it can you give me the link?😅

What era do you think your accordion is from? I recently picked up this one which looks exactly like yours but I've been unable to date it.

Fake it 'till you make it!

I have picked up SW stations from India, Pakistan, South Africa, and Madagascar just using the whip antenna. I live in Erie, PA. In the states. I was talking to a individual who is very knowledgeable of radios and radio signals. He told me in the right conditions it is possible to pick up stations that far away on just your whip antenna. It was between 11.000-13.000 MHZ frequency range I received this on. So you probably was picking up India in good conditions

Probably vehicle theft

Thanks for the vid! I just received a device that has the same appearance for $15nzd from Temu & am not ready to crack it open/break it to see what the battery size is. That Flawless battery looks to say 750mAh, 3.2v on the wrapper, a shaver battery. Good to know. I wonder if the Temu device uses the same mAh/voltage. It cost me considerably less than what a retail Flawless device would of, and appears to be very similar to the one you've found on your yard/sidewalk.

Fake